Datapath Vision SD4+1S

Videofångstadapter - PCIe x4
Beställningsvara
Tillverkare Datapath
Artikelnr VISIONSD4+1S
  • 21 783 SEK
  • från 697 SEK /mån
Share |
  • Information
    • Four channel SD video + one channel RGB/DVI/HD video capture card
    • HD modes using the supplied DVI/component adapter or DVI/HDMI adapter
    • Four SD capture channels for PAL/NTSC, SECAM (composite or S-video inputs)
    • On card processor for real time mode and sync detection
    • Support for multiple cards allowing up to 128 SD capture channels + 32 DVI-I capture channels
    • Direct DMA driver software and streaming driver
    • High quality down scaling
    • High performance DMA to system memory or direct to graphics memory with scatter gather
    • Support for separate H/V sync, composite sync or sync on green
    The VisionSD4+1S delivers extreme performance with 650 MB/s transfer bus bandwidth further improved to the 480 MB/s of the VisionSD4+1. This video capture card has five complete video capture channels supporting a single channel for up to 1920 x 1080 DVI or 2048 x 1536 analog resolution, plus four SD analog capture channels. The VisionSD4+1S captures the Analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming. When a Datapath graphics card is used, the VisionSD4+1S transfers the data directly to the graphics card thereby increasing performance. The VisionSD4+1S capture card sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance. When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionSD4+1S sends the data to system memory or direct to the graphics card, dependant on the software used for display.
  • Specifikation
  • Utökad specifikation
  • Nedladdningsbara filer